K-MAC Datsun

DATSUN 240Z, 260Z, 280Z
AT LAST a replacement top strut mount (Front & Rear) Camber & Caster kit ... That Works!

ALSO

510, 610, B210, 240K, C210, R30, Bluebird, Skyline, Stanza, Sunny click here for NISSAN

K-MAC Stage 2/3 feature "Replaceable" centers for virtual life time usage

CAN RECORD STREET OR RACE SETTINGS and with the unique K-MAC Patented design, CHANGE IN JUST 30 SECONDS - (time taken to loosen the 3 top nuts). And with K-MAC NO jacking / disassembly required and can be adjusted accurately (under load)!

FRONT CAMBER + CASTER "STRUT" KITS
WHY K-MAC . . .

	Simply replaces upper strut mounts.
	Patented design allows Quickest & Biggest adjustment.
	With K-MAC there is NO HEIGHT INCREASE.
	Can adjust accurately (under load).
	Can install with factory diam. coils or adjustable coil overs.
	INCLUDES EXTRA HEAVY DUTY self aligning (no side-load), Pillow ball centers.(PTFE lined)

CAMBER: Essential if lowering
or expensive low profile tires fitted. Reduces costly, premature, inner edge tire wear. Improves traction.

CASTER: Improves hi-speed directional stability. Better steering response. Quicker turn in. Reduced dive/lift on Brake/Acceleration.

FRONT KITS

240Z, 260Z, 280Z

'69 - 6/78

Neg. Camber (Pos. or Neg Caster)

#541016K-3

$465 - pair

Pos. Camber

#541026K-3

$465 - pair

K-MAC (Patented design) - only replacement top mount kit to provide adequate Camber (and Caster) adjustment. Like all K-MAC kits "Bolt-on" no modifications. Also available K-MAC (Patented) Coil-over "Coil Jacker" conversion kit (2 1/2" / 64mm I.D Coil Springs).CLICK HERE

#541016 / #541026 only available in Stage 3. Steel with extra h/duty pillow ball center.

Also Rear Kits - See "Rear" Below

280ZX

7/78 - '83

#541116J -1/2/3

$370 - pair

300ZX (Z31)

'84 - '89

#541316J -1/2/3

$370 - pair

Available in Stage 1,2 or 3.
Quickest and Biggest adjustment range - fit with or without Coil-overs.
For K-MAC (Patented) Coil-over "Coil Jacker" conversion kit (2 1/2"/64mm I D Coil Springs).

Stage 2 & 3 feature replaceable centers for virtual lifetime usage.

300ZX (Z32)

'89 - '96

#541416K - 3

$465 - pair

Camber adjuster kit:
K-MAC - Strongest design Race/Rally proven. Replacement top control arms. Because of extreme side load most other brands suffer from premature failure.

300ZX (Z32)

'89 - '96

#541516F

$210

Replacement front Caster bushes. K-MAC patented design allows precise single wrench adjustment.

REAR - Camber and Toe

240Z, 260Z, 280Z

'69 - 6/78

Neg. Camber

#541026K

$465 -

Pos. Camber

#541016K

$465 -

280ZX

7/78 - '83

#540526H

$320 -

300ZX (Z31)

'84 - '89

#541326H

$320 -

K-MAC kit replaces the 4 trail arm to crossmember bushes. Unique patented design provides single wrench / precise / maximum adjustment. Bush extraction tool supplied.

300ZX (Z32)

'89 - '96

#542026H

$320 -

K-MAC kit replaces the upper and lower inner control arm bushes. Unique patented design. Provides single wrench / precise / maximum adjustment.
Bush extraction tool provided.

FRONT

510, 610, 1600, 180B, 200B, 240K, C210, R30

'68 - '85

#540516J -1/2/3

$370 - pair

R31, Pintara, Skyline

'86 - '97

#541816J -1/2/3

$370 - pair

Bluebird

'81 - '86

#540716K -- 2/3

$370 - pair

Sunny, B210, 1200, 120Y

'78 - '82

#540816J -1/2/3

$370 - pair

Stanza

'78 - '83

#540816J -1/2/3

$370 - pair

Available in Stage 1,2 or 3.
Quickest and Biggest adjustment range - fit with or without Coil-overs.
For K-MAC (Patented) Coil-over "Coil Jacker" conversion kit (2 1/2"/64mm I D Coil Springs).

Stage 2 & 3 feature replaceable centers for virtual lifetime usage.

REAR

510, 610, 180B, Skyline, R30, C210

'68 - '88

#540526H

$320 -

R31 (independent rear)

'89 - '91

#541716H

$320 -

K-MAC kit replaces the 4 trail arm to crossmember bushes. Unique patented design provides single wrench / precise / maximum adjustment. Bush extraction tool supplied.

200SX, Gazelle, Silvia (S12)

'83 - '89

#541626H

$320 -

180SX, Silvia (S13, S14)

'85 - '03

#541826H

$320 -

K-MAC kit replaces the upper and lower inner control arm bushes. Unique patented design. Provides single wrench / precise / maximum adjustment.
Bush extraction tool provided.

With K-MAC you are dealing with "actual" Manufacturers!
So if not listed - inquire (chances are we make it).

DEALERS: Your customers expect you to sell

click here to view more new products

Does your local dealer know about K-MAC?